Veo Pan and Tilt Manual do Utilizador descarregar pdf (Página 22)

•

Date/Time: Use this option to enter the current date and time on the Veo 120XXN. It is

recommended that you enter this information before you start recording video so that the correct

date and time is associated with all video. Use this option to specify the time zone, to enable the

Daylight Savings Time (DST) and to synchronize the time with a network time server.

When DST is enabled time moves 1 HR forward in the Spring and 1 HR backwards in the Fall. When

the time goes back 1 HR, you need to search for recorded data prior to 1:00AM in order to see

video for both overlapped times (1:00AM - 1:59AM in-DST and 1:00AM - 1:59AM out-DST).

Figure 34. Date/Time System Menu

If the time is changed to go back in time, then data will overlap and will be deleted, as shown above.

Figure 35. Overlapped Date Erased Display

Figure 36. Network Menu

• Network: Use this option to set up the network connection information for the Veo 120XXN.

Network settings are used when someone accesses the Veo 120XXN from a computer on which the

Veo Remote is installed.

- When the Veo 120XXN is connected to a router, port forwarding must be enabled so

that the Veo 120XXN can be accessed outside of the LAN. The client service port would

need to be forwarded (default Client service port is 6100).

- If there are changes to the network settings, the Veo 120XXN needs to restart itself in

order to apply the new settings.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Sem comentários

Veo Pan and Tilt Manual do Utilizador Página 22