Veo Pan and Tilt Manual do Utilizador descarregar pdf (Página 39)

FACTORY DEFAULT SETTINGS

You can restore the Veo 120XXN to its original factory settings. Restoring the unit to its original factory

settings will reset all the custom settings. This, however, will not erase any recorded video from the

hard disk, nor will it reformat the drive.

1. Press the MENU button on the front panel of the Veo 120XXN or on the remote control and login into

an administrative account.

2. In the GENERAL tab select SYSTEM option and the ENTER button to enter System menu. Remember that

only Administrator accounts have access to system setup settings settings. For the list of account

permissions and limitations, please refer to Table A on page 14.

3. Using the arrows, move down to System Management and press ENTER.

4. Select the PRESS button next to the “FACTORY DEFAULT” option and press ENTER. A warning message

appears on the screen. Select OK and press the ENTER button to reset the unit to its original factory

settings. If you do not want to restore the settings to factory, select CANCEL, and then press enter ENTER

button to keep the current settings.

5. To return to live video, press RETURN repeatedly until the Menu disappears from the video pane.

Figure 70. System Management Menu

EXPORTING/IMPORTING SYSTEM SETTINGS

Use the System Data option to export all system settings (with an exception of Network settings and

System Name) onto the USB storage device. The saved settings can either be retained for backup

purposes in case settings are accidentally reset to factory defaults or in order to duplicate the settings

to other Veo 120XXN systems. Note that the settings may only be exported to the same system

model, i.e. settings from Veo 12016N may only be used for other Veo 12016N systems, but not Veo

12004N/12008N systems.

To export system settings to the USB device, connect the USB storage device to the USB port on the

front system panel, then press SAVE next to “SYSTEM DATA” option. Once the settings have been suc-

cessfully saved onto USB drive, the “Success” message will be displayed on the screen.

To import system settings from the USB device, connect the USB storage device to the matching model

of Veo 120XXN system. Then press LOAD next to “SYSTEM DATA” option. Once the settings have been

successfully loaded from the USB drive, the “Success” message will be displayed on the screen. Check

system settings to make sure the configurations have been successfully loaded.

1 2 ... 34 35 36 37 38 39 40 41 42

Sem comentários

Veo Pan and Tilt Manual do Utilizador Página 39