Veo Observer Plus Instruções de Operação descarregar pdf (Página 57)

Charged Aerosol Detectors

Corona Veo and Corona Veo RS

Operating Instructions Page 49

5.3.2 Main Menu

The Main Menu provides the serial number of the detector, the firmware version.

Fig. 7: Main Menu screen (here: Corona Veo RS)

Parameter Description

Serial Number Indicates the serial number of your detector.

Firmware Version Indicates the installed firmware version.

The following options are available:

Soft key… Select to…

Bright+

Bright-

Adjust the brightness of the display

Press Bright+ to increase, Bright- to decrease the display brightness.

Gas On

Gas Off

Turn on and off the gas flow to pressurize the detector.

If the internal gas flow is disabled, 'Gas On' appears. If internal gas flow is

enabled, 'Gas Off' is displayed as soft key.

System

Access the screens that are used to select a variety of general operating

parameters, such as defining default values, setting time/date, etc. Some of these

settings can be saved as default settings while the detector is powered on.

For details, see section 5.3.4 (→ page 55).

Run Mode

Start a sample analysis. For details, see section 5.3.3 (→ page 50).

MAIN MENU

Serial Number= 5081003

Select Desired Operation

Firmware Version = 1.0

Gas On

Bright- Bright+

System Menu Run Mode

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 143 144

Sem comentários

Veo Observer Plus Instruções de Operação Página 57